Home Improvement Ideas

Kitchenaid-refrigerator-not-making-ice-but-water-works, if the ice maker’s water supply is not connected to water supply line, turn the ice maker off. if the ice maker is on, but disconnected to water supply line, the following could happen: the ice maker will continue to try to make ice, causing a buzzing sound a refrigerator section may to be too cold. The icemaker module is equipped with a motor that cycles the ice ejector arms or turns a tray to eject the cubes into the ice bucket. when the thermostat or sensor on the icemaker tray reaches about 1... 5 degrees fahrenheit, the motor cycles to release the ice cubes. at the end of the cycle, the icemaker module sends power to the water inlet valve to refill the tray with water., what to do when your frigidaire's ice maker is not working, but the water does? try these fixes first. if your frigidaire refrigerator is not making ice anymore, but the water dispenser still works (or only works slowly), don’t lose your cool! this is a common problem. read on for the most common ....

Kitchenaid model kfxl25ryms2 : ice maker not making ice. water dispenser works fine. when i open the door, remove the ice bin, hold down the door light switch, i can see and feel the ice maker unit turning the fins, raising the arm, and continue through the cylcle., trying to find the cause for the failure of your ice maker can be easy or baffling. this is a guide about kitchenaid refrigerator ice maker not working..

This video covers a number of ice maker troubleshooting tips. for additional troubleshooting or product information please visit us at http://producthelp.kitchenaid.com., i have a kitchenaid side by side refrigerator. model number is ksrs27c. everything was working fine until after a power outtage (lasted only 10 secs). after that my ice maker stopped making ice but water dispenser is working fine. i had changed the ice maker once before but at that time it still filled the tray in the ice maker. now, it doesn't even fill the tray..

I have a whirlpool not working as well. i talked to whirlpool today about the two flashes thinking it was a fault code but that is normal. when you simulate the door being closed the inferred light should be on., ge profile water dispenser is not working. utilizes the "water by culligan" filter. ice maker is working fine. depress switch = light on / no water swapped filter = no change verified water is going to filter when switch is depressed by pressing spring up with adapter on and no filter= water...